GARBAGE DISPOSALS/PARTS
Used for off-angles, bay windows, and inside or outside 90 degree corners to provide straight edges every time. Material can be second coated immediately. Slotted holes along edges promotes faster drying time and adds extra adhesion where lumber movement could occur. Made of high tech composite material. Installation does not require fasteners or stapling. Drywall tape will not fuzz-up during sanding.
Mold and mildew resistant, lightweight tile backerboard for use in floors, walls, countertops, tub and shower areas. Ideal for wall tile and flooring applications in baths, kitchens, and laundry rooms. Suitable for direct applied finishes, tile, stone, and thin-brick used in building exteriors. Panels are non-combustible, cut easily and install quickly.
Tear-away L-bead provides an easy, top quality finish at intersections of gypsum board and ceiling grid. Once joint compound is applied, the tear-away is removed to form a crisp, clean edge. White vinyl. Corner bead is ordered by the case.
Wonderboard Lite is up to 20\% lighter. This fiberglass mesh-reinforced cement backerboard can be used for residential and commercial tile, stone, slate and thin-brick applications. Uses include walls, floors, ceilings, counters and vanities. High-flexural strength, along with moisture resistance, makes Wonderboard Lite ideal for both interior and exterior substrate applications. Includes a preprinted pattern on the panel surface and is easy to score, snap, cut and fasten, simplifying installation. Meets the performance standards of ANSI (American National Standards Institute) A118.9.
Durable, rigid vinyl reinforcement for finishing square gypsum corners. Its flexibility resists dents and helps to speed the finishing process. Easy-to-apply, can be nailed or staple applied. Corner bead is ordered by the case.
Tape on bead. Use for 90 deg. outside corners. Suitable for use on any thickness of wallboard. Nailing is not required. Installation and precision corner alignment is easier, and no nail pops when wood framing shrinks. Use with setting-type compounds for quicker finishing and decoration.
Tape on bead. Installs easily to form a smooth rounded outer corner. The 3/4" radius can be used for 1/2" or 5/8" drywall. Nailing is not required. Installation and precision corner alignment is easier, and no nail pops when wood framing shrinks. Use with setting-type compounds for quicker finishing and decoration.
Dur-A-Bead hot-dipped galvanized coated steel offers superior corrosion protection for external corners. Has deeply knurled and perforated flanges for joint compound adhesion. Corner bead is ordered by the case.
RC-2 PRO RESILIENT CHANNEL
STR TRACK 10" 16G 1-1/2" LEGS
STR TRACK 6" 20G 1-1/2" LEGS
STR TRACK 3-5/8" 20G 1-1/2" LEGS
STR TRACK 2-1/2" 20G 1-1/2" LEGS
STRAP 1-1/2 18GA
The ClarkDietrich FastBridge™ clip is used to secure U-Channel or Cold Rolled Channel (CRC) to structural wall studs when used in load-bearing or curtain wall applications. The wall stud friction fit design allows for as little as one screw for the connection to the U-Channel. The FastBridge clip is a stiffened, G90 galvanized steel clip that's tested and designed to facilitate the rapid, efficient installation of 1-1/2" U-Channel lateral bracing for exterior curtain wall framing, loadbearing walls or high interior partitions constructed of structural studs.
The FastBridge clip is a stiffened, G90 galvanized steel clip that’s tested and designed to facilitate the rapid, efficient installation of 1-1/2″ U-Channel lateral bracing for exterior curtain wall framing, loadbearing walls or interior partitions constructed of structural or non-structural studs
FURRING CHANNEL (20GA)
STR STUD 10" 12G 1-5/8" FL
STR STUD 10" 16G 1-5/8" FL
STR STUD 6" 20G 1-5/8" FL
STR STUD 3-5/8" 20G 1-5/8" FL
STR STUD 2-1/2" 20G 1-5/8" FL